Bär Cargolift - Lifting Performance.

IAA 2018 – Driving tomorrow (VI 02/18)

It's finally here: The IAA 2018 takes place from 20 to 27 September 2018 in Hannover. We have prepared the following trade fair highlights for you in line with the motto "Driving tomorrow": 

  • BC 750 S2S – The powerful Cargolift (load centre 750 mm) for the light segment
  • BC 750 S2L – When the payload is in focus
  • BC S4V – Standard Cargolift with variably positioned under run bar
  • BC R4U – For practice-oriented RetFalt use on trucks with low coupling
  • BC 600 A2V - Mounted on the new Mercedes-Benz Sprinter
  • NightGuide – For more safety by an illuminated platform edging
  • Telematic interface – For modern, standardised data transmission following DIN 4630
  • Bär CargoTracking – Load tracking by RFID
  • MyCargolift – The right Cargolift recommendation for the customer-specific use
  • And much more!

We look forward to your visit in Hall 26, Stand D30 as well as outdoors at K83.

Sales newsletter

RETTmobil 2019 in Fulda, Germany
15.05.2019-17.05.2019

Solutrans 2019 in Lyon, France
19.11.2019-23.11.2019

For Standard and Falt Cargolifts the new control box Bär Control EVO is serial equipment since the beginning of this year (see VI 01/2017). Now the product groups RetFalt and Ret/HydFalt follow. As a new equipment SwitchKey replaces the former electrical key switch (see VI 02/2017) - also as serial equiment for the products R2T, R4T and R4C.

The externally fitted electrical key switch is available as optional equipment. 

Service newsletter

From now on Bär CargoCheck 2.8 will support you even better in maintenance works, parameterability and error diagnostics of our Cargolifts. From September 22nd to September 29th, 2016 we will show the new Bär CargoCheck at the IAA show 2016 in Hannover in Hall 26, stand D30.

We have also updated our service protocol that supports you in your maintenance and service works. You will find the service protocol on our Website in service products and service documents.

When the user is absent he has to protect his tail lift against unauthorized use be third parties. In practice most often a switch off in the driver's cabin is necessary before the user goes away from the vehicle. This makes the (un)loading process more complicated.

The SmartControl remote control with RadioKey resolves this norm demand in a unique way: When the driver leaves the Cargolift's work area, RadioKey locks automatically all control elements. For unlocking he returns in the work area and presses an arbitrary button on the SmartControl remote control. A further log-in is not necessary.

Since beginning of the year all optional SmartControl remote controls are equipped with RadioKey. Watch the product movie »